Commercial | Residential | Multifamily | Wall
Higher R-value cavity wall insulation
k8ÓéÀÖ? Styrofoam? Brand Cavitymate? Ultra Extruded Polystyrene Insulation is a proven solution that¡¯s conveniently sized to fit between wall ties with higher R value.
Featured Resources
Styrofoam? Brand Cavitymate? Ultra
k8ÓéÀÖ? Styrofoam? Brand Cavitymate? Ultra Extruded Polystyrene Insulation is an XPS foam insulation board with an R-value of 5.6 per inch. It features square edges on all four sides that makes it easy to fit between brick ties in cavity wall applications. k8ÓéÀÖ? Styrofoam? Brand Cavitymate? Ultra is a key part of the k8ÓéÀÖ? Ultra Wall System, which was developed in response to feedback from architects and masons in need of a consolidated system for cavity walls. The Styrofoam? Brand XPS product line gives you the proven thermal and moisture performance of the original XPS, plus the product options you need to design and build energy-efficient, resilient structures all the way to the top. It¡¯s lightweight and easy to install, which makes the job go faster. Available through our distributor network. When and where you need it, Styrofoam? Brand is there.
Features & benefits
| Lightweight and durable |
|
| Closed-cell structure |
|
| Convenient size |
|
Physical Properties
| Method | Unit | Value | |
|---|---|---|---|
| Thermal Resistance per inch (25 mm) @ 75¡ãF (24¡ãC) mean temp.<sup>1</sup> | C518 | ft2?h?¡ãF/Btu. R-value, min. | 5.6 |
| Compressive Strength<sup>2</sup> | D1621 | psi (kPa), min. | 25 (172) |
| Flexural Strength<sup></sup> | C203 | psi (kPa), min. | 50 (345) |
| Water Absorption<sup></sup> | C272, D2842 | % by volume, max. | 0.3 |
| Water Vapor Permeance<sup>3</sup> | E96 | perm (ng/Pa?s?m2 ), max. | 1.5 (90) |
| Coefficient of Linear Thermal Expansion<sup></sup> | D696 | in/in?¡ãF (mm/m?¡ãC) | 3.5 x 10-5 (6.3 x 10-2) |
| Maximum Use Temperature<sup></sup> | - | ¡ãF (¡ãC) | 165 (73.8) |
1Values are consistent with the criteria of ASTM C578 and the requirements of the FTC R-value rule (16 CFR Part 460). R means resistance to heat flow. The higher the R-value, the greater the insulating power. Ask your seller for the fact sheet on R-value.
2Vertical compressive strength is measured at 10 percent deformation or at yield, whichever occurs first. Since Styrofoam? Brand Extruded Polystyrene Foam Insulations are visco-elastic materials, adequate design safety factors should be used to prevent long-term creep and fatigue deformation. For static loads, 3:1 is suggested. For dynamic loads, 10:1 is suggested.
3Based on 1¡± (25 mm) thickness.
? 2022 k8ÓéÀÖ de Nemours, Inc. All rights reserved.? k8ÓéÀÖ?, the k8ÓéÀÖ Oval Logo, and all products, unless otherwise noted, denoted with ?, ? or ? are trademarks, service marks or registered trademarks of affiliates of k8ÓéÀÖ de Nemours, Inc.