Reduce plant downtime and protect steam generation systems with k8ÓéÀÖ's advanced water treatment technologies
Boilers receive feed water consisting of varying proportions of recovered condensed water (return water) and fresh water, which has been purified in varying degrees (make-up water).
High purity feed water is required to ensure proper operation of industrial steam generation systems to produce high-quality steam and transport heat throughout an entire facility.
Treating boiler feed water is essential for both high- and low-pressure boilers. Removal of organics, suspended particles, dissolved minerals, and dissolved gases is critical to avoid scaling and fouling, which will lead to failure of the boiler and downstream equipment, plant downtime, and expensive maintenance fees.
Specific treatment processes vary depending on the requirements of the boiler and the quality or chemistry of the feed and make-up water. k8ÓéÀÖ offers comprehensive solutions for your boiler feed water challenges that can achieve your desired quality levels, leading to optimized water use, reduced asset corrosion and boiler downtime, and ultimately trimmed operational costs.
k8ÓéÀÖ multi-tech solutions for boiler feed water treatment
Pretreatment with Ultrafiltration
k8ÓéÀÖ Ultrafiltration (UF)?is a pressure-driven purification process that separates particulate matter from soluble compounds using an ultrafine membrane media. Compared to traditional media and sand filters, UF technology offers: better & consistent filtrate quality regardless feedwater quality upsets; minimum to no use of pretreatment chemicals (polymers, coagulants, pH adjustment) and associated costs for sludge disposal; smaller footprint and lower weight. k8ÓéÀÖ offers a wide selection of UF modules, skids, and systems that provide industries with peace-of-mind solutions to address their challenges while maintaining lowest total cost of ownership and managing a reliable and profitable operation.
?
Total Organic Carbon Removal with Ion Exchange Resins
k8ÓéÀÖ? AmberLite? SCAV Resins are organic traps that remove natural organic matter from feedwater to protect the demineralization system from fouling related operational issues and also reduce TOC in the treated water.??
?
Softening & Dealkalization with Ion Exchange Resins
k8ÓéÀÖ? AmberLite??ion exchange softening resins remove cations associated with hardness (such as Ca and Mg) from feedwater to avoid scale formation caused by precipitation of sparingly soluble salts like calcium carbonate.? Ion exchange resins (IER) can also remove bicarbonate alkalinity associated with scaling.
?
View all Pretreatment products
Demineralization with Ion Exchange Resins
k8ÓéÀÖ? AmberLite??ion exchange resins?for demineralization are used to remove all cations, anions, and large organic contaminants from feed water.? k8ÓéÀÖ has over 80 years of experience manufacturing?the widest range of industry-leading, reliable ion exchange resins in world-class manufacturing facilities.
?
Demineralization with Reverse Osmosis Brackish Water Elements
FilmTec? reverse osmosis (RO) elements?are pressure-driven purification products that separate ions, dissolved salts, and minerals using a semi-permeable membrane. We provide the most comprehensive portfolio of high-quality, top-performing RO technology in the world, trusted globally by many industrial customers for over 40 years.
- FilmTec? Prime RO Portfolio:?the next generation of FilmTec? brackish water RO elements designed specifically for industrial utility water treatment.
- FilmTec? ECO RO Portfolio:?FilmTec? ECO Elements offer excellent rejection with significantly lower energy and reduced chemical consumption than traditional.
- FilmTec? Fortilife? RO Portfolio: this?product family is designed for industrial-users who need to treat challenging water. FilmTec??Fortilife? CR100 element is designed to treat water highly prone to biofouling. The FilmTec? Fortilife? CR200 element can cope with the combined challenge of biological and organic fouling prone waters.
?
High Recovery Demineralization with Closed Circuit Reverse Osmosis
The patented DesaliTec? SOAR closed circuit reverse osmosis (CCRO)?system works by circulating water through a single stage of membrane elements until the desired recovery level is achieved instead of using complex traditional multi-stage methods. Brine is periodically replaced with fresh feedwater without stopping permeate flow. Recovery is flexible and can be set at the system control panel. The cross flow required for RO membrane operation is controlled with an internal circulation pump. Frequent and complete brine flushing prevents scale precipitation and disrupts biofouling, making very high recovery rates possible even from mineral-laden or contaminated feedwaters.
?
View all Demineralization products
Polishing with Ion Exchange Resin
k8ÓéÀÖ? AmberLite??mixed bed?ion exchange resins?is the standard final polishing step for boiler make-up water and is a critical part of steam condensate treatment. Mixed bed polishers remove low ppm (parts per million) to ppb (parts per billion) range contaminants but can also protect a system in the event of condenser leaks, thereby improving plant reliability. k8ÓéÀÖ offers a wide selection of polishing resins including premixed resins for non-regenerable systems.??
?
Polishing with Electrodeionization
k8ÓéÀÖ?electrodeionization (EDI)?is a continuous and chemical-free process of removing ionized and ionizable species from the feed water using DC power. k8ÓéÀÖ? electrodeionization modules optimize performance, maintain continuous product quality and can produce up to 18 mega ohm-cm high purity water with high silica and boron removal.
?
View all Polishing products
-
Pretreatment
Pretreatment with Ultrafiltration
k8ÓéÀÖ Ultrafiltration (UF)?is a pressure-driven purification process that separates particulate matter from soluble compounds using an ultrafine membrane media. Compared to traditional media and sand filters, UF technology offers: better & consistent filtrate quality regardless feedwater quality upsets; minimum to no use of pretreatment chemicals (polymers, coagulants, pH adjustment) and associated costs for sludge disposal; smaller footprint and lower weight. k8ÓéÀÖ offers a wide selection of UF modules, skids, and systems that provide industries with peace-of-mind solutions to address their challenges while maintaining lowest total cost of ownership and managing a reliable and profitable operation.
?
Total Organic Carbon Removal with Ion Exchange Resins
k8ÓéÀÖ? AmberLite? SCAV Resins are organic traps that remove natural organic matter from feedwater to protect the demineralization system from fouling related operational issues and also reduce TOC in the treated water.??
?
Softening & Dealkalization with Ion Exchange Resins
k8ÓéÀÖ? AmberLite??ion exchange softening resins remove cations associated with hardness (such as Ca and Mg) from feedwater to avoid scale formation caused by precipitation of sparingly soluble salts like calcium carbonate.? Ion exchange resins (IER) can also remove bicarbonate alkalinity associated with scaling.
?
View all Pretreatment products
-
Demineralization
Demineralization with Ion Exchange Resins
k8ÓéÀÖ? AmberLite??ion exchange resins?for demineralization are used to remove all cations, anions, and large organic contaminants from feed water.? k8ÓéÀÖ has over 80 years of experience manufacturing?the widest range of industry-leading, reliable ion exchange resins in world-class manufacturing facilities.
?
Demineralization with Reverse Osmosis Brackish Water Elements
FilmTec? reverse osmosis (RO) elements?are pressure-driven purification products that separate ions, dissolved salts, and minerals using a semi-permeable membrane. We provide the most comprehensive portfolio of high-quality, top-performing RO technology in the world, trusted globally by many industrial customers for over 40 years.
- FilmTec? Prime RO Portfolio:?the next generation of FilmTec? brackish water RO elements designed specifically for industrial utility water treatment.
- FilmTec? ECO RO Portfolio:?FilmTec? ECO Elements offer excellent rejection with significantly lower energy and reduced chemical consumption than traditional.
- FilmTec? Fortilife? RO Portfolio: this?product family is designed for industrial-users who need to treat challenging water. FilmTec??Fortilife? CR100 element is designed to treat water highly prone to biofouling. The FilmTec? Fortilife? CR200 element can cope with the combined challenge of biological and organic fouling prone waters.
?
High Recovery Demineralization with Closed Circuit Reverse Osmosis
The patented DesaliTec? SOAR closed circuit reverse osmosis (CCRO)?system works by circulating water through a single stage of membrane elements until the desired recovery level is achieved instead of using complex traditional multi-stage methods. Brine is periodically replaced with fresh feedwater without stopping permeate flow. Recovery is flexible and can be set at the system control panel. The cross flow required for RO membrane operation is controlled with an internal circulation pump. Frequent and complete brine flushing prevents scale precipitation and disrupts biofouling, making very high recovery rates possible even from mineral-laden or contaminated feedwaters.
?
View all Demineralization products
-
Polishing
Polishing with Ion Exchange Resin
k8ÓéÀÖ? AmberLite??mixed bed?ion exchange resins?is the standard final polishing step for boiler make-up water and is a critical part of steam condensate treatment. Mixed bed polishers remove low ppm (parts per million) to ppb (parts per billion) range contaminants but can also protect a system in the event of condenser leaks, thereby improving plant reliability. k8ÓéÀÖ offers a wide selection of polishing resins including premixed resins for non-regenerable systems.??
?
Polishing with Electrodeionization
k8ÓéÀÖ?electrodeionization (EDI)?is a continuous and chemical-free process of removing ionized and ionizable species from the feed water using DC power. k8ÓéÀÖ? electrodeionization modules optimize performance, maintain continuous product quality and can produce up to 18 mega ohm-cm high purity water with high silica and boron removal.
?
View all Polishing products
Find products for boiler feed water treatment
View a list of products to protect your steam generation systems.
Explore other industrial utility water applications
Our technologies and solutions are designed to help you overcome water challenges to produce your desired quantity and quality of industrial utility water.
Protect cooling tower water and increase plant operating efficiency with our advanced water treatment technologies.
